Saturday, February 9, 2008

Mauritius--A Projection Challenge




Recently, I was asked by one of my clients to project a bunch of data for the island nation of Mauritius in preparation for some wetlands-related field work they will be doing there. They received the data from the national government, and there was no projection information included with the data.

As it turns out, Mauritius has its own grid, which is independent from all other geographic coordinate systems and is not natively supported by ArcMap. According to a map I found on the Government of Mauritius web site, the projection is as follows:

Grid : Mauritius
Projection : Lambert Conical Orthomorphic
Spheroid : Clarke 1880
Unit Of Measurement : Metre
Longitude of origin : 57°31'18.58" East of Greenwich
Latitude of Origin : 20°11'42.25" South
Scale Factor at Origin : Unity
False Co-ordinates of origin : 1,000,000m Easting
1,000,000m Northing

Unfortunately, Lambert Conical Orthomorphic is not available in ArcMap, but through my research I determined that Lambert Conformal Conic is a very close approximation. So, converting the above description into ESRI lingo, it looks something like this:

Projected Coordinate System: Mauritius
Projection: Lambert_Conformal_Conic
False_Easting: 1000000.00000000
False_Northing: 1000000.00000000
Central_Meridian: 57.52183000
Standard_Parallel_1: -20.19507000
Standard_Parallel_2: -20.19507000
Scale_Factor: 1.0
Latitude_Of_Origin: -20.19507000
Linear Unit: Meter

I punted on the Standard Parallels, assuming that the island is small enough for the latitude of origin to suffice for both parallels. This sort of worked, and I placed the GTOPO global DEM in the map frame with the newly projected data, resulting in the first image. Seems close, but a bit hard to tell.

So I downloaded SRTM data for the island, which has much higher resolution than GTOPO, and the result is the second image. Clearly, pretty far off. At this point, I was getting in over my head with respect to creating custom datum/spheroid combinations, so I called the good folks at ESRI and after an hour on the phone, they helped me to build a very solid projection and transformation for Mauritius (this is the actual PRJ file, please feel free to use it, just remove the carriage returns after each comma before saving as a PRJ):

PROJCS["Mauritius_lambert",
GEOGCS["Mauritius",
DATUM["",
SPHEROID["Clarke_1880_RGS",6378249.145,293.465]],
PRIMEM["Greenwich",0.0],
UNIT["Degree",0.0174532925199433]],
PROJECTION["Lambert_Conformal_Conic"],
PARAMETER["False_Easting",1000000.0],
PARAMETER["False_Northing",1000000.0],
PARAMETER["Central_Meridian",57.52182777777779],
PARAMETER["Standard_Parallel_1",-20.19506944444445],
PARAMETER["Standard_Parallel_2",-20.19506944444445],
PARAMETER["Latitude_Of_Origin",-20.19506944444445],
UNIT["Meter",1.0]]

The custom datum comes from the Le_Pouce_1934_TO_WGS_1984 transformation ESRI helped me to create, which is here (again, remove CR after commas, save as a gtf file):

GEOGTRAN["Le_Pouce_1934_TO_WGS_1984",
GEOGCS["Mauritius",DATUM["",
SPHEROID["Clarke_1880_RGS",6378249.145,293.465]],
PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],
GEOGCS["GCS_WGS_1984",DATUM["D_WGS_1984",
SPHEROID["WGS_1984",6378137.0,298.257223563]],
PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],
METHOD["Geocentric_Translation"],
PARAMETER["X_Axis_Translation",-770.1],
PARAMETER["Y_Axis_Translation",158.4],
PARAMETER["Z_Axis_Translation",-498.2]]

The result is a very nice agreement between the red coastline vector and the SRTM topography, shown in the third image.

7 comments:

Anonymous said...

I'm mauritian and recently got a similar task to convert those coordinates to gps. I was stuck over 3 weeks. Now, I have something solid I can work on.
Many Thanks.
Peter

Chris said...

This has really helped me project the data I need for a UNDP project I am working on in Mauritius. Thank you. Do you have similar information for he island of Rodrigues? They also work with a unique coordinate system that I am battling to get to fit with QuickBird data for the island which is on UTM 41S. Any chance you could assist?
Regards

Chris Whyte

Matt said...

Hello Chris--

I would be happy to help. Please email me at matt(at)coregis.net, or call me at the number listed on my contact page. Thanks!

Unknown said...

very helpful!

Anonymous said...

Very informative article!It is of big help for someone who is planning to spend a holiday in Mauritius.

Unknown said...

hello...im facing a similar problem,the map that u downloaded from the govt website,is it set on the NGS of mauritius?right now,this is important to me,cz im working based on the assumption that it does...plz help...

Anonymous said...

i'm a mauritian and am doing a course in town and country planning. actually its not helping me much because i got a project to do on gis and unfortunately i did not get a knowledge about it... i hope this can help me.
THANKS A LOT.
shalinee